Importing and Exporting Guide ¶

Introduction ¶

In this guide, we will present the concept of IMPORTED targets and demonstrate how to import existing executable or library files from disk into a CMake project. We will then show how CMake supports exporting targets from one CMake-based project and importing them into another. Finally, we will demonstrate how to package a project with a configuration file to allow for easy integration into other CMake projects. This guide and the complete example source code can be found in the Help/guide/importing-exporting directory of the CMake source code tree.

Importing Targets ¶

IMPORTED targets are used to convert files outside of a CMake project into logical targets inside of the project. IMPORTED targets are created using the IMPORTED option of the add_executable() and add_library() commands. No build files are generated for IMPORTED targets. Once imported, IMPORTED targets may be referenced like any other target within the project and provide a convenient, flexible reference to outside executables and libraries.

By default, the IMPORTED target name has scope in the directory in which it is created and below. We can use the GLOBAL option to extended visibility so that the target is accessible globally in the build system.

Details about the IMPORTED target are specified by setting properties whose names begin in IMPORTED_ and INTERFACE_. For example, IMPORTED_LOCATION contains the full path to the target on disk.

Importing Executables ¶

To start, we will walk through a simple example that creates an IMPORTED executable target and then references it from the add_custom_command() command.

We'll need to do some setup to get started. We want to create an executable that when run creates a basic main.cc file in the current directory. The details of this project are not important. Navigate to Help/guide/importing-exporting/MyExe, create a build directory, run cmake and build and install the project.

$ cd Help/guide/importing-exporting/MyExe
$ mkdir build
$ cd build
$ cmake ..
$ cmake --build .
$ cmake --install . --prefix <install location>
$ <install location>/myexe
$ ls
[...] main.cc [...]

Now we can import this executable into another CMake project. The source code for this section is available in Help/guide/importing-exporting/Importing. In the CMakeLists file, use the add_executable() command to create a new target called myexe. Use the IMPORTED option to tell CMake that this target references an executable file located outside of the project. No rules will be generated to build it and the IMPORTED target property will be set to true.

add_executable(myexe IMPORTED)

Next, set the IMPORTED_LOCATION property of the target using the set_property() command. This will tell CMake the location of the target on disk. The location may need to be adjusted to the <install location> specified in the previous step.

set_property(TARGET myexe PROPERTY
             IMPORTED_LOCATION "../InstallMyExe/bin/myexe")

We can now reference this IMPORTED target just like any target built within the project. In this instance, let's imagine that we want to use the generated source file in our project. Use the IMPORTED target in the add_custom_command() command:

add_custom_command(OUTPUT main.cc COMMAND myexe)

As COMMAND specifies an executable target name, it will automatically be replaced by the location of the executable given by the IMPORTED_LOCATION property above.

Finally, use the output from add_custom_command():

add_executable(mynewexe main.cc)

Importing Libraries ¶

In a similar manner, libraries from other projects may be accessed through IMPORTED targets.

Note: The full source code for the examples in this section is not provided and is left as an exercise for the reader.

In the CMakeLists file, add an IMPORTED library and specify its location on disk:

add_library(foo STATIC IMPORTED)
set_property(TARGET foo PROPERTY
             IMPORTED_LOCATION "/path/to/libfoo.a")

Then use the IMPORTED library inside of our project:

add_executable(myexe src1.c src2.c)
target_link_libraries(myexe PRIVATE foo)

On Windows, a .dll and its .lib import library may be imported together:

add_library(bar SHARED IMPORTED)
set_property(TARGET bar PROPERTY
             IMPORTED_LOCATION "c:/path/to/bar.dll")
set_property(TARGET bar PROPERTY
             IMPORTED_IMPLIB "c:/path/to/bar.lib")
add_executable(myexe src1.c src2.c)
target_link_libraries(myexe PRIVATE bar)

A library with multiple configurations may be imported with a single target:

find_library(math_REL NAMES m)
find_library(math_DBG NAMES md)
add_library(math STATIC IMPORTED GLOBAL)
set_target_properties(math PROPERTIES
  IMPORTED_LOCATION "${math_REL}"
  IMPORTED_LOCATION_DEBUG "${math_DBG}"
  IMPORTED_CONFIGURATIONS "RELEASE;DEBUG"
)
add_executable(myexe src1.c src2.c)
target_link_libraries(myexe PRIVATE math)

The generated build system will link myexe to m.lib when built in the release configuration, and md.lib when built in the debug configuration.

Exporting Targets ¶

While IMPORTED targets on their own are useful, they still require that the project that imports them knows the locations of the target files on disk. The real power of IMPORTED targets is when the project providing the target files also provides a CMake file to help import them. A project can be setup to produce the necessary information so that it can easily be used by other CMake projects be it from a build directory, a local install or when packaged.

In the remaining sections, we will walk through a set of example projects step-by-step. The first project will create and install a library and corresponding CMake configuration and package files. The second project will use the generated package.

Let's start by looking at the MathFunctions project in the Help/guide/importing-exporting/MathFunctions directory. Here we have a header file MathFunctions.h that declares a sqrt function:

#pragma once

namespace MathFunctions {
double sqrt(double x);
}

And a corresponding source file MathFunctions.cxx:

#include "MathFunctions.h"

#include <cmath>

namespace MathFunctions {
double sqrt(double x)
{
  return std::sqrt(x);
}
}

Don't worry too much about the specifics of the C++ files, they are just meant to be a simple example that will compile and run on many build systems.

Now we can create a CMakeLists.txt file for the MathFunctions project. Start by specifying the cmake_minimum_required() version and project() name:

cmake_minimum_required(VERSION 3.15)
project(MathFunctions)

# make cache variables for install destinations
include(GNUInstallDirs)

# specify the C++ standard
set(CMAKE_CXX_STANDARD 11)
set(CMAKE_CXX_STANDARD_REQUIRED True)

The GNUInstallDirs module is included in order to provide the project with the flexibility to install into different platform layouts by making the directories available as cache variables.

Create a library called MathFunctions with the add_library() command:

add_library(MathFunctions STATIC MathFunctions.cxx)

And then use the target_include_directories() command to specify the include directories for the target:

target_include_directories(MathFunctions
                           PUBLIC
                           "$<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR}>"
                           "$<INSTALL_INTERFACE:${CMAKE_INSTALL_INCLUDEDIR}>"
)

We need to tell CMake that we want to use different include directories depending on if we're building the library or using it from an installed location. If we don't do this, when CMake creates the export information it will export a path that is specific to the current build directory and will not be valid for other projects. We can use generator expressions to specify that if we're building the library include the current source directory. Otherwise, when installed, include the include directory. See the Creating Relocatable Packages section for more details.

The install(TARGETS) and install(EXPORT) commands work together to install both targets (a library in our case) and a CMake file designed to make it easy to import the targets into another CMake project.

First, in the install(TARGETS) command we will specify the target, the EXPORT name and the destinations that tell CMake where to install the targets.

install(TARGETS MathFunctions
        EXPORT MathFunctionsTargets
        LIBRARY DESTINATION ${CMAKE_INSTALL_LIBDIR}
        ARCHIVE DESTINATION ${CMAKE_INSTALL_LIBDIR}
        RUNTIME DESTINATION ${CMAKE_INSTALL_BINDIR}
        INCLUDES DESTINATION ${CMAKE_INSTALL_INCLUDEDIR}
)

Here, the EXPORT option tells CMake to create an export called MathFunctionsTargets. The generated IMPORTED targets have appropriate properties set to define their usage requirements, such as INTERFACE_INCLUDE_DIRECTORIES, INTERFACE_COMPILE_DEFINITIONS and other relevant built-in INTERFACE_ properties. The INTERFACE variant of user-defined properties listed in COMPATIBLE_INTERFACE_STRING and other Compatible Interface Properties are also propagated to the generated IMPORTED targets. For example, in this case, the IMPORTED target will have its INTERFACE_INCLUDE_DIRECTORIES property populated with the directory specified by the INCLUDES DESTINATION property. As a relative path was given, it is treated as relative to the CMAKE_INSTALL_PREFIX.

Note, we have not asked CMake to install the export yet.

We don't want to forget to install the MathFunctions.h header file with the install(FILES) command. The header file should be installed to the include directory, as specified by the target_include_directories() command above.

install(FILES MathFunctions.h DESTINATION ${CMAKE_INSTALL_INCLUDEDIR})

Now that the MathFunctions library and header file are installed, we also need to explicitly install the MathFunctionsTargets export details. Use the install(EXPORT) command to export the targets in MathFunctionsTargets, as defined by the install(TARGETS) command.

install(EXPORT MathFunctionsTargets
        FILE MathFunctionsTargets.cmake
        NAMESPACE MathFunctions::
        DESTINATION ${CMAKE_INSTALL_LIBDIR}/cmake/MathFunctions
)

This command generates the MathFunctionsTargets.cmake file and arranges to install it to lib/cmake. The file contains code suitable for use by downstreams to import all targets listed in the install command from the installation tree.

The NAMESPACE option will prepend MathFunctions:: to the target names as they are written to the export file. This convention of double-colons gives CMake a hint that the name is an IMPORTED target when it is used by downstream projects. This way, CMake can issue a diagnostic message if the package providing it was not found.

The generated export file contains code that creates an IMPORTED library.

# Create imported target MathFunctions::MathFunctions
add_library(MathFunctions::MathFunctions STATIC IMPORTED)

set_target_properties(MathFunctions::MathFunctions PROPERTIES
  INTERFACE_INCLUDE_DIRECTORIES "${_IMPORT_PREFIX}/include"
)

This code is very similar to the example we created by hand in the Importing Libraries section. Note that ${_IMPORT_PREFIX} is computed relative to the file location.

An outside project may load this file with the include() command and reference the MathFunctions library from the installation tree as if it were built in its own tree. For example:

 include(${INSTALL_PREFIX}/lib/cmake/MathFunctionTargets.cmake)
 add_executable(myexe src1.c src2.c )
 target_link_libraries(myexe PRIVATE MathFunctions::MathFunctions)

Line 1 loads the target CMake file. Although we only exported a single target, this file may import any number of targets. Their locations are computed relative to the file location so that the install tree may be easily moved. Line 3 references the imported MathFunctions library. The resulting build system will link to the library from its installed location.

Executables may also be exported and imported using the same process.

Any number of target installations may be associated with the same export name. Export names are considered global so any directory may contribute a target installation. The install(EXPORT) command only needs to be called once to install a file that references all targets. Below is an example of how multiple exports may be combined into a single export file, even if they are in different subdirectories of the project.

# A/CMakeLists.txt
add_executable(myexe src1.c)
install(TARGETS myexe DESTINATION lib/myproj
        EXPORT myproj-targets)

# B/CMakeLists.txt
add_library(foo STATIC foo1.c)
install(TARGETS foo DESTINATION lib EXPORTS myproj-targets)

# Top CMakeLists.txt
add_subdirectory (A)
add_subdirectory (B)
install(EXPORT myproj-targets DESTINATION lib/myproj)

Creating Packages ¶

At this point, the MathFunctions project is exporting the target information required to be used by other projects. We can make this project even easier for other projects to use by generating a configuration file so that the CMake find_package() command can find our project.

To start, we will need to make a few additions to the CMakeLists.txt file. First, include the CMakePackageConfigHelpers module to get access to some helper functions for creating config files.

include(CMakePackageConfigHelpers)

Then we will create a package configuration file and a package version file.

Creating a Package Configuration File ¶

Use the configure_package_config_file() command provided by the CMakePackageConfigHelpers to generate the package configuration file. Note that this command should be used instead of the plain configure_file() command. It helps to ensure that the resulting package is relocatable by avoiding hardcoded paths in the installed configuration file. The path given to INSTALL_DESTINATION must be the destination where the MathFunctionsConfig.cmake file will be installed. We will examine the contents of the package configuration file in the next section.

configure_package_config_file(${CMAKE_CURRENT_SOURCE_DIR}/Config.cmake.in
  "${CMAKE_CURRENT_BINARY_DIR}/MathFunctionsConfig.cmake"
  INSTALL_DESTINATION ${CMAKE_INSTALL_LIBDIR}/cmake/MathFunctions
)

Install the generated configuration files with the INSTALL(files) command. Both MathFunctionsConfigVersion.cmake and MathFunctionsConfig.cmake are installed to the same location, completing the package.

install(FILES
          "${CMAKE_CURRENT_BINARY_DIR}/MathFunctionsConfig.cmake"
          "${CMAKE_CURRENT_BINARY_DIR}/MathFunctionsConfigVersion.cmake"
        DESTINATION ${CMAKE_INSTALL_LIBDIR}/cmake/MathFunctions
)

Now we need to create the package configuration file itself. In this case, the Config.cmake.in file is very simple but sufficient to allow downstreams to use the IMPORTED targets.

@PACKAGE_INIT@

include("${CMAKE_CURRENT_LIST_DIR}/MathFunctionsTargets.cmake")

check_required_components(MathFunctions)

The first line of the file contains only the string @PACKAGE_INIT@. This expands when the file is configured and allows the use of relocatable paths prefixed with PACKAGE_. It also provides the set_and_check() and check_required_components() macros.

The check_required_components helper macro ensures that all requested, non-optional components have been found by checking the <Package>_<Component>_FOUND variables for all required components. This macro should be called at the end of the package configuration file even if the package does not have any components. This way, CMake can make sure that the downstream project hasn't specified any non-existent components. If check_required_components fails, the <Package>_FOUND variable is set to FALSE, and the package is considered to be not found.

The set_and_check() macro should be used in configuration files instead of the normal set() command for setting directories and file locations. If a referenced file or directory does not exist, the macro will fail.

If any macros should be provided by the MathFunctions package, they should be in a separate file which is installed to the same location as the MathFunctionsConfig.cmake file, and included from there.

All required dependencies of a package must also be found in the package configuration file. Let's imagine that we require the Stats library in our project. In the CMakeLists file, we would add:

find_package(Stats 2.6.4 REQUIRED)
target_link_libraries(MathFunctions PUBLIC Stats::Types)

As the Stats::Types target is a PUBLIC dependency of MathFunctions, downstreams must also find the Stats package and link to the Stats::Types library. The Stats package should be found in the configuration file to ensure this.

include(CMakeFindDependencyMacro)
find_dependency(Stats 2.6.4)

The find_dependency macro from the CMakeFindDependencyMacro module helps by propagating whether the package is REQUIRED, or QUIET, etc. The find_dependency macro also sets MathFunctions_FOUND to False if the dependency is not found, along with a diagnostic that the MathFunctions package cannot be used without the Stats package.

Exercise: Add a required library to the MathFunctions project.

Creating a Package Version File ¶

The CMakePackageConfigHelpers module provides the write_basic_package_version_file() command for creating a simple package version file. This file is read by CMake when find_package() is called to determine the compatibility with the requested version, and to set some version-specific variables such as <PackageName>_VERSION, <PackageName>_VERSION_MAJOR, <PackageName>_VERSION_MINOR, etc. See cmake-packages documentation for more details.

set(version 3.4.1)

set_property(TARGET MathFunctions PROPERTY VERSION ${version})
set_property(TARGET MathFunctions PROPERTY SOVERSION 3)
set_property(TARGET MathFunctions PROPERTY
  INTERFACE_MathFunctions_MAJOR_VERSION 3)
set_property(TARGET MathFunctions APPEND PROPERTY
  COMPATIBLE_INTERFACE_STRING MathFunctions_MAJOR_VERSION
)

# generate the version file for the config file
write_basic_package_version_file(
  "${CMAKE_CURRENT_BINARY_DIR}/MathFunctionsConfigVersion.cmake"
  VERSION "${version}"
  COMPATIBILITY AnyNewerVersion
)

In our example, MathFunctions_MAJOR_VERSION is defined as a COMPATIBLE_INTERFACE_STRING which means that it must be compatible among the dependencies of any depender. By setting this custom defined user property in this version and in the next version of MathFunctions, cmake will issue a diagnostic if there is an attempt to use version 3 together with version 4. Packages can choose to employ such a pattern if different major versions of the package are designed to be incompatible.

Exporting Targets from the Build Tree ¶

Typically, projects are built and installed before being used by an outside project. However, in some cases, it is desirable to export targets directly from a build tree. The targets may then be used by an outside project that references the build tree with no installation involved. The export() command is used to generate a file exporting targets from a project build tree.

If we want our example project to also be used from a build directory we only have to add the following to CMakeLists.txt:

export(EXPORT MathFunctionsTargets
       FILE "${CMAKE_CURRENT_BINARY_DIR}/cmake/MathFunctionsTargets.cmake"
       NAMESPACE MathFunctions::
)

Here we use the export() command to generate the export targets for the build tree. In this case, we'll create a file called MathFunctionsTargets.cmake in the cmake subdirectory of the build directory. The generated file contains the required code to import the target and may be loaded by an outside project that is aware of the project build tree. This file is specific to the build-tree, and is not relocatable.

It is possible to create a suitable package configuration file and package version file to define a package for the build tree which may be used without installation. Consumers of the build tree can simply ensure that the CMAKE_PREFIX_PATH contains the build directory, or set the MathFunctions_DIR to <build_dir>/MathFunctions in the cache.

An example application of this feature is for building an executable on a host platform when cross-compiling. The project containing the executable may be built on the host platform and then the project that is being cross-compiled for another platform may load it.

Building and Installing a Package ¶

At this point, we have generated a relocatable CMake configuration for our project that can be used after the project has been installed. Let's try to build the MathFunctions project:

mkdir MathFunctions_build
cd MathFunctions_build
cmake ../MathFunctions
cmake --build .

In the build directory, notice that the file MathFunctionsTargets.cmake has been created in the cmake subdirectory.

Now install the project:

$ cmake --install . --prefix "/home/myuser/installdir"

Creating Relocatable Packages ¶

Packages created by install(EXPORT) are designed to be relocatable, using paths relative to the location of the package itself. They must not reference absolute paths of files on the machine where the package is built that will not exist on the machines where the package may be installed.

When defining the interface of a target for EXPORT, keep in mind that the include directories should be specified as relative paths to the CMAKE_INSTALL_PREFIX but should not explicitly include the CMAKE_INSTALL_PREFIX:

target_include_directories(tgt INTERFACE
  # Wrong, not relocatable:
  $<INSTALL_INTERFACE:${CMAKE_INSTALL_PREFIX}/include/TgtName>
)

target_include_directories(tgt INTERFACE
  # Ok, relocatable:
  $<INSTALL_INTERFACE:include/TgtName>
)

The $<INSTALL_PREFIX> generator expression may be used as a placeholder for the install prefix without resulting in a non-relocatable package. This is necessary if complex generator expressions are used:

target_include_directories(tgt INTERFACE
  # Ok, relocatable:
  $<INSTALL_INTERFACE:$<INSTALL_PREFIX>/include/TgtName>
)

This also applies to paths referencing external dependencies. It is not advisable to populate any properties which may contain paths, such as INTERFACE_INCLUDE_DIRECTORIES or INTERFACE_LINK_LIBRARIES, with paths relevant to dependencies. For example, this code may not work well for a relocatable package:

target_link_libraries(MathFunctions INTERFACE
  ${Foo_LIBRARIES} ${Bar_LIBRARIES}
  )
target_include_directories(MathFunctions INTERFACE
  "$<INSTALL_INTERFACE:${Foo_INCLUDE_DIRS};${Bar_INCLUDE_DIRS}>"
  )

The referenced variables may contain the absolute paths to libraries and include directories as found on the machine the package was made on. This would create a package with hard-coded paths to dependencies not suitable for relocation.

Ideally such dependencies should be used through their own IMPORTED targets that have their own IMPORTED_LOCATION and usage requirement properties such as INTERFACE_INCLUDE_DIRECTORIES populated appropriately. Those imported targets may then be used with the target_link_libraries() command for MathFunctions:

target_link_libraries(MathFunctions INTERFACE Foo::Foo Bar::Bar)

With this approach the package references its external dependencies only through the names of IMPORTED targets. When a consumer uses the installed package, the consumer will run the appropriate find_package() commands (via the find_dependency macro described above) to find the dependencies and populate the imported targets with appropriate paths on their own machine.

Using the Package Configuration File ¶

Now we're ready to create a project to use the installed MathFunctions library. In this section we will be using source code from Help\guide\importing-exporting\Downstream. In this directory, there is a source file called main.cc that uses the MathFunctions library to calculate the square root of a given number and then prints the results:

// A simple program that outputs the square root of a number
#include <iostream>
#include <string>

#include "MathFunctions.h"

int main(int argc, char* argv[])
{
  if (argc < 2) {
    std::cout << "Usage: " << argv[0] << " number" << std::endl;
    return 1;
  }

  // convert input to double
  const double inputValue = std::stod(argv[1]);

  // calculate square root
  const double sqrt = MathFunctions::sqrt(inputValue);
  std::cout << "The square root of " << inputValue << " is " << sqrt
            << std::endl;

  return 0;
}

As before, we'll start with the cmake_minimum_required() and project() commands in the CMakeLists.txt file. For this project, we'll also specify the C++ standard.

cmake_minimum_required(VERSION 3.15)
project(Downstream)

# specify the C++ standard
set(CMAKE_CXX_STANDARD 11)
set(CMAKE_CXX_STANDARD_REQUIRED True)

We can use the find_package() command:

find_package(MathFunctions 3.4.1 EXACT)

Create an executable:

add_executable(myexe main.cc)

And link to the MathFunctions library:

target_link_libraries(myexe PRIVATE MathFunctions::MathFunctions)

That's it! Now let's try to build the Downstream project.

mkdir Downstream_build
cd Downstream_build
cmake ../Downstream
cmake --build .

A warning may have appeared during CMake configuration:

CMake Warning at CMakeLists.txt:4 (find_package):
  By not providing "FindMathFunctions.cmake" in CMAKE_MODULE_PATH this
  project has asked CMake to find a package configuration file provided by
  "MathFunctions", but CMake did not find one.

  Could not find a package configuration file provided by "MathFunctions"
  with any of the following names:

    MathFunctionsConfig.cmake
    mathfunctions-config.cmake

  Add the installation prefix of "MathFunctions" to CMAKE_PREFIX_PATH or set
  "MathFunctions_DIR" to a directory containing one of the above files.  If
  "MathFunctions" provides a separate development package or SDK, be sure it
  has been installed.

Set the CMAKE_PREFIX_PATH to where MathFunctions was installed previously and try again. Ensure that the newly created executable runs as expected.

Adding Components ¶

Let's edit the MathFunctions project to use components. The source code for this section can be found in Help\guide\importing-exporting\MathFunctionsComponents. The CMakeLists file for this project adds two subdirectories: Addition and SquareRoot.

cmake_minimum_required(VERSION 3.15)
project(MathFunctionsComponents)

# make cache variables for install destinations
include(GNUInstallDirs)

# specify the C++ standard
set(CMAKE_CXX_STANDARD 11)
set(CMAKE_CXX_STANDARD_REQUIRED True)

add_subdirectory(Addition)
add_subdirectory(SquareRoot)

Generate and install the package configuration and package version files:

include(CMakePackageConfigHelpers)

# set version
set(version 3.4.1)

# generate the version file for the config file
write_basic_package_version_file(
  "${CMAKE_CURRENT_BINARY_DIR}/MathFunctionsConfigVersion.cmake"
  VERSION "${version}"
  COMPATIBILITY AnyNewerVersion
)

# create config file
configure_package_config_file(${CMAKE_CURRENT_SOURCE_DIR}/Config.cmake.in
  "${CMAKE_CURRENT_BINARY_DIR}/MathFunctionsConfig.cmake"
  INSTALL_DESTINATION ${CMAKE_INSTALL_LIBDIR}/cmake/MathFunctions
  NO_CHECK_REQUIRED_COMPONENTS_MACRO
)

# install config files
install(FILES
          "${CMAKE_CURRENT_BINARY_DIR}/MathFunctionsConfig.cmake"
          "${CMAKE_CURRENT_BINARY_DIR}/MathFunctionsConfigVersion.cmake"
        DESTINATION ${CMAKE_INSTALL_LIBDIR}/cmake/MathFunctions
)

If COMPONENTS are specified when the downstream uses find_package(), they are listed in the <PackageName>_FIND_COMPONENTS variable. We can use this variable to verify that all necessary component targets are included in Config.cmake.in. At the same time, this function will act as a custom check_required_components macro to ensure that the downstream only attempts to use supported components.

@PACKAGE_INIT@

set(_MathFunctions_supported_components Addition SquareRoot)

foreach(_comp ${MathFunctions_FIND_COMPONENTS})
  if (NOT _comp IN_LIST _MathFunctions_supported_components)
    set(MathFunctions_FOUND False)
    set(MathFunctions_NOT_FOUND_MESSAGE "Unsupported component: ${_comp}")
  endif()
  include("${CMAKE_CURRENT_LIST_DIR}/MathFunctions${_comp}Targets.cmake")
endforeach()

Here, the MathFunctions_NOT_FOUND_MESSAGE is set to a diagnosis that the package could not be found because an invalid component was specified. This message variable can be set for any case where the _FOUND variable is set to False, and will be displayed to the user.

The Addition and SquareRoot directories are similar. Let's look at one of the CMakeLists files:

# create library
add_library(SquareRoot STATIC SquareRoot.cxx)

add_library(MathFunctions::SquareRoot ALIAS SquareRoot)

# add include directories
target_include_directories(SquareRoot
                           PUBLIC
                           "$<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR}>"
                           "$<INSTALL_INTERFACE:${CMAKE_INSTALL_INCLUDEDIR}>"
)

# install the target and create export-set
install(TARGETS SquareRoot
        EXPORT SquareRootTargets
        LIBRARY DESTINATION ${CMAKE_INSTALL_LIBDIR}
        ARCHIVE DESTINATION ${CMAKE_INSTALL_LIBDIR}
        RUNTIME DESTINATION ${CMAKE_INSTALL_BINDIR}
        INCLUDES DESTINATION ${CMAKE_INSTALL_INCLUDEDIR}
)

# install header file
install(FILES SquareRoot.h DESTINATION ${CMAKE_INSTALL_INCLUDEDIR})

# generate and install export file
install(EXPORT SquareRootTargets
        FILE MathFunctionsSquareRootTargets.cmake
        NAMESPACE MathFunctions::
        DESTINATION ${CMAKE_INSTALL_LIBDIR}/cmake/MathFunctions
)

Now we can build the project as described in earlier sections. To test using this package, we can use the project in Help\guide\importing-exporting\DownstreamComponents. There's two differences from the previous Downstream project. First, we need to find the package components. Change the find_package line from:

find_package(MathFunctions 3.4.1 EXACT)

To:

find_package(MathFunctions 3.4 COMPONENTS Addition SquareRoot)

and the target_link_libraries line from:

target_link_libraries(myexe PRIVATE MathFunctions::MathFunctions)

To:

target_link_libraries(myexe PRIVATE MathFunctions::Addition MathFunctions::SquareRoot)

In main.cc, replace #include MathFunctions.h with:

#include "Addition.h"
#include "SquareRoot.h"

Finally, use the Addition library:

  const double sum = MathFunctions::add(inputValue, inputValue);
  std::cout << inputValue << " + " << inputValue << " = " << sum << std::endl;

Build the Downstream project and confirm that it can find and use the package components.