Step 10: Selecting Static or Shared Libraries

In this section we will show how the BUILD_SHARED_LIBS variable can be used to control the default behavior of add_library(), and allow control over how libraries without an explicit type (STATIC, SHARED, MODULE or OBJECT) are built.

To accomplish this we need to add BUILD_SHARED_LIBS to the top-level CMakeLists.txt. We use the option() command as it allows users to optionally select if the value should be ON or OFF.

Next we are going to refactor MathFunctions to become a real library that encapsulates using mysqrt or sqrt, instead of requiring the calling code to do this logic. This will also mean that USE_MYMATH will not control building MathFunctions, but instead will control the behavior of this library.

The first step is to update the starting section of the top-level CMakeLists.txt to look like:

CMakeLists.txt
cmake_minimum_required(VERSION 3.15)

# set the project name and version
project(Tutorial VERSION 1.0)

# specify the C++ standard
add_library(tutorial_compiler_flags INTERFACE)
target_compile_features(tutorial_compiler_flags INTERFACE cxx_std_11)

# add compiler warning flags just when building this project via
# the BUILD_INTERFACE genex
set(gcc_like_cxx "$<COMPILE_LANG_AND_ID:CXX,ARMClang,AppleClang,Clang,GNU,LCC>")
set(msvc_cxx "$<COMPILE_LANG_AND_ID:CXX,MSVC>")
target_compile_options(tutorial_compiler_flags INTERFACE
  "$<${gcc_like_cxx}:$<BUILD_INTERFACE:-Wall;-Wextra;-Wshadow;-Wformat=2;-Wunused>>"
  "$<${msvc_cxx}:$<BUILD_INTERFACE:-W3>>"
)

# control where the static and shared libraries are built so that on windows
# we don't need to tinker with the path to run the executable
set(CMAKE_ARCHIVE_OUTPUT_DIRECTORY "${PROJECT_BINARY_DIR}")
set(CMAKE_LIBRARY_OUTPUT_DIRECTORY "${PROJECT_BINARY_DIR}")
set(CMAKE_RUNTIME_OUTPUT_DIRECTORY "${PROJECT_BINARY_DIR}")

option(BUILD_SHARED_LIBS "Build using shared libraries" ON)

# configure a header file to pass the version number only
configure_file(TutorialConfig.h.in TutorialConfig.h)

# add the MathFunctions library
add_subdirectory(MathFunctions)

# add the executable
add_executable(Tutorial tutorial.cxx)
target_link_libraries(Tutorial PUBLIC MathFunctions tutorial_compiler_flags)

Now that we have made MathFunctions always be used, we will need to update the logic of that library. So, in MathFunctions/CMakeLists.txt we need to create a SqrtLibrary that will conditionally be built and installed when USE_MYMATH is enabled. Now, since this is a tutorial, we are going to explicitly require that SqrtLibrary is built statically.

The end result is that MathFunctions/CMakeLists.txt should look like:

MathFunctions/CMakeLists.txt
# add the library that runs
add_library(MathFunctions MathFunctions.cxx)

# state that anybody linking to us needs to include the current source dir
# to find MathFunctions.h, while we don't.
target_include_directories(MathFunctions
                           INTERFACE ${CMAKE_CURRENT_SOURCE_DIR}
                           )

# should we use our own math functions
option(USE_MYMATH "Use tutorial provided math implementation" ON)
if(USE_MYMATH)

  target_compile_definitions(MathFunctions PRIVATE "USE_MYMATH")

  # first we add the executable that generates the table
  add_executable(MakeTable MakeTable.cxx)
  target_link_libraries(MakeTable PRIVATE tutorial_compiler_flags)

  # add the command to generate the source code
  add_custom_command(
    OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/Table.h
    COMMAND MakeTable ${CMAKE_CURRENT_BINARY_DIR}/Table.h
    DEPENDS MakeTable
    )

  # library that just does sqrt
  add_library(SqrtLibrary STATIC
              mysqrt.cxx
              ${CMAKE_CURRENT_BINARY_DIR}/Table.h
              )

  # state that we depend on our binary dir to find Table.h
  target_include_directories(SqrtLibrary PRIVATE
                             ${CMAKE_CURRENT_BINARY_DIR}
                             )

  target_link_libraries(SqrtLibrary PUBLIC tutorial_compiler_flags)
  target_link_libraries(MathFunctions PRIVATE SqrtLibrary)
endif()

target_link_libraries(MathFunctions PUBLIC tutorial_compiler_flags)

# define the symbol stating we are using the declspec(dllexport) when
# building on windows
target_compile_definitions(MathFunctions PRIVATE "EXPORTING_MYMATH")

# install libs
set(installable_libs MathFunctions tutorial_compiler_flags)
if(TARGET SqrtLibrary)
  list(APPEND installable_libs SqrtLibrary)
endif()
install(TARGETS ${installable_libs} DESTINATION lib)
# install include headers
install(FILES MathFunctions.h DESTINATION include)

Next, update MathFunctions/mysqrt.cxx to use the mathfunctions and detail namespaces:

MathFunctions/mysqrt.cxx
#include <iostream>

#include "MathFunctions.h"

// include the generated table
#include "Table.h"

namespace mathfunctions {
namespace detail {
// a hack square root calculation using simple operations
double mysqrt(double x)
{
  if (x <= 0) {
    return 0;
  }

  // use the table to help find an initial value
  double result = x;
  if (x >= 1 && x < 10) {
    std::cout << "Use the table to help find an initial value " << std::endl;
    result = sqrtTable[static_cast<int>(x)];
  }

  // do ten iterations
  for (int i = 0; i < 10; ++i) {
    if (result <= 0) {
      result = 0.1;
    }
    double delta = x - (result * result);
    result = result + 0.5 * delta / result;
    std::cout << "Computing sqrt of " << x << " to be " << result << std::endl;
  }

  return result;
}
}
}

We also need to make some changes in tutorial.cxx, so that it no longer uses USE_MYMATH:

  1. Always include MathFunctions.h

  2. Always use mathfunctions::sqrt

  3. Don't include cmath

Finally, update MathFunctions/MathFunctions.h to use dll export defines:

MathFunctions/MathFunctions.h
#if defined(_WIN32)
#  if defined(EXPORTING_MYMATH)
#    define DECLSPEC __declspec(dllexport)
#  else
#    define DECLSPEC __declspec(dllimport)
#  endif
#else // non windows
#  define DECLSPEC
#endif

namespace mathfunctions {
double DECLSPEC sqrt(double x);
}

At this point, if you build everything, you may notice that linking fails as we are combining a static library without position independent code with a library that has position independent code. The solution to this is to explicitly set the POSITION_INDEPENDENT_CODE target property of SqrtLibrary to be True when building shared libraries.

MathFunctions/CMakeLists.txt
  # state that SqrtLibrary need PIC when the default is shared libraries
  set_target_properties(SqrtLibrary PROPERTIES
                        POSITION_INDEPENDENT_CODE ${BUILD_SHARED_LIBS}
                        )

Exercise: We modified MathFunctions.h to use dll export defines. Using CMake documentation can you find a helper module to simplify this?