string¶

String operations.

Synopsis¶

Search and Replace
  string(FIND <string> <substring> <out-var> [...])
  string(REPLACE <match-string> <replace-string> <out-var> <input>...)
  string(REGEX MATCH <match-regex> <out-var> <input>...)
  string(REGEX MATCHALL <match-regex> <out-var> <input>...)
  string(REGEX REPLACE <match-regex> <replace-expr> <out-var> <input>...)

Manipulation
  string(APPEND <string-var> [<input>...])
  string(PREPEND <string-var> [<input>...])
  string(CONCAT <out-var> [<input>...])
  string(JOIN <glue> <out-var> [<input>...])
  string(TOLOWER <string> <out-var>)
  string(TOUPPER <string> <out-var>)
  string(LENGTH <string> <out-var>)
  string(SUBSTRING <string> <begin> <length> <out-var>)
  string(STRIP <string> <out-var>)
  string(GENEX_STRIP <string> <out-var>)
  string(REPEAT <string> <count> <out-var>)

Comparison
  string(COMPARE <op> <string1> <string2> <out-var>)

Hashing
  string(<HASH> <out-var> <input>)

Generation
  string(ASCII <number>... <out-var>)
  string(HEX <string> <out-var>)
  string(CONFIGURE <string> <out-var> [...])
  string(MAKE_C_IDENTIFIER <string> <out-var>)
  string(RANDOM [<option>...] <out-var>)
  string(TIMESTAMP <out-var> [<format string>] [UTC])
  string(UUID <out-var> ...)

JSON
  string(JSON <out-var> [ERROR_VARIABLE <error-var>]
         {GET | TYPE | LENGTH | REMOVE}
         <json-string> <member|index> [<member|index> ...])
  string(JSON <out-var> [ERROR_VARIABLE <error-var>]
         MEMBER <json-string>
         [<member|index> ...] <index>)
  string(JSON <out-var> [ERROR_VARIABLE <error-var>]
         SET <json-string>
         <member|index> [<member|index> ...] <value>)
  string(JSON <out-var> [ERROR_VARIABLE <error-var>]
         EQUAL <json-string1> <json-string2>)

Search and Replace¶

Search and Replace With Plain Strings¶

string(FIND <string> <substring> <output_variable> [REVERSE])

Return the position where the given <substring> was found in the supplied <string>. If the REVERSE flag was used, the command will search for the position of the last occurrence of the specified <substring>. If the <substring> is not found, a position of -1 is returned.

The string(FIND) subcommand treats all strings as ASCII-only characters. The index stored in <output_variable> will also be counted in bytes, so strings containing multi-byte characters may lead to unexpected results.

string(REPLACE <match_string>
       <replace_string> <output_variable>
       <input> [<input>...])

Replace all occurrences of <match_string> in the <input> with <replace_string> and store the result in the <output_variable>.

Search and Replace With Regular Expressions¶

string(REGEX MATCH <regular_expression>
       <output_variable> <input> [<input>...])

Match the <regular_expression> once and store the match in the <output_variable>. All <input> arguments are concatenated before matching. Regular expressions are specified in the subsection just below.

string(REGEX MATCHALL <regular_expression>
       <output_variable> <input> [<input>...])

Match the <regular_expression> as many times as possible and store the matches in the <output_variable> as a list. All <input> arguments are concatenated before matching.

string(REGEX REPLACE <regular_expression>
       <replacement_expression> <output_variable>
       <input> [<input>...])

Match the <regular_expression> as many times as possible and substitute the <replacement_expression> for the match in the output. All <input> arguments are concatenated before matching.

The <replacement_expression> may refer to parenthesis-delimited subexpressions of the match using \1, \2, ..., \9. Note that two backslashes (\\1) are required in CMake code to get a backslash through argument parsing.

Regex Specification¶

The following characters have special meaning in regular expressions:

^: Matches at beginning of input
$: Matches at end of input
.: Matches any single character
\<char>: Matches the single character specified by <char>. Use this to match special regex characters, e.g. \. for a literal . or \\ for a literal backslash \. Escaping a non-special character is unnecessary but allowed, e.g. \a matches a.
[ ]: Matches any character(s) inside the brackets
[^ ]: Matches any character(s) not inside the brackets
-: Inside brackets, specifies an inclusive range between characters on either side e.g. [a-f] is [abcdef] To match a literal - using brackets, make it the first or the last character e.g. [+*/-] matches basic mathematical operators.
*: Matches preceding pattern zero or more times
+: Matches preceding pattern one or more times
?: Matches preceding pattern zero or once only
|: Matches a pattern on either side of the |
(): Saves a matched subexpression, which can be referenced in the REGEX REPLACE operation.

New in version 3.9: All regular expression-related commands, including e.g. if(MATCHES), save subgroup matches in the variables CMAKE_MATCH_<n> for <n> 0..9.

*, + and ? have higher precedence than concatenation. | has lower precedence than concatenation. This means that the regular expression ^ab+d$ matches abbd but not ababd, and the regular expression ^(ab|cd)$ matches ab but not abd.

CMake language Escape Sequences such as \t, \r, \n, and \\ may be used to construct literal tabs, carriage returns, newlines, and backslashes (respectively) to pass in a regex. For example:

The quoted argument "[ \t\r\n]" specifies a regex that matches any single whitespace character.
The quoted argument "[/\\]" specifies a regex that matches a single forward slash / or backslash \.
The quoted argument "[A-Za-z0-9_]" specifies a regex that matches any single "word" character in the C locale.
The quoted argument "\$\\a\\+b\$" specifies a regex that matches the exact string (a+b). Each \\ is parsed in a quoted argument as just \, so the regex itself is actually $\a\+\b$. This can alternatively be specified in a Bracket Argument without having to escape the backslashes, e.g. [[$\a\+\b$]].

Manipulation¶

string(APPEND <string_variable> [<input>...])

New in version 3.4.

Append all the <input> arguments to the string.

string(PREPEND <string_variable> [<input>...])

New in version 3.10.

Prepend all the <input> arguments to the string.

string(CONCAT <output_variable> [<input>...])

Concatenate all the <input> arguments together and store the result in the named <output_variable>.

string(JOIN <glue> <output_variable> [<input>...])

New in version 3.12.

Join all the <input> arguments together using the <glue> string and store the result in the named <output_variable>.

To join a list's elements, prefer to use the JOIN operator from the list() command. This allows for the elements to have special characters like ; in them.

string(TOLOWER <string> <output_variable>)

Convert <string> to lower characters.

string(TOUPPER <string> <output_variable>)

Convert <string> to upper characters.

string(LENGTH <string> <output_variable>)

Store in an <output_variable> a given string's length in bytes. Note that this means if <string> contains multi-byte characters, the result stored in <output_variable> will not be the number of characters.

string(SUBSTRING <string> <begin> <length> <output_variable>)

Store in an <output_variable> a substring of a given <string>. If <length> is -1 the remainder of the string starting at <begin> will be returned.

Changed in version 3.2: If <string> is shorter than <length> then the end of the string is used instead. Previous versions of CMake reported an error in this case.

Both <begin> and <length> are counted in bytes, so care must be exercised if <string> could contain multi-byte characters.

string(STRIP <string> <output_variable>)

Store in an <output_variable> a substring of a given <string> with leading and trailing spaces removed.

string(GENEX_STRIP <string> <output_variable>)

New in version 3.1.

Strip any generator expressions from the input <string> and store the result in the <output_variable>.

string(REPEAT <string> <count> <output_variable>)

New in version 3.15.

Produce the output string as the input <string> repeated <count> times.

Comparison¶

string(COMPARE LESS <string1> <string2> <output_variable>)
string(COMPARE GREATER <string1> <string2> <output_variable>)
string(COMPARE EQUAL <string1> <string2> <output_variable>)
string(COMPARE NOTEQUAL <string1> <string2> <output_variable>)
string(COMPARE LESS_EQUAL <string1> <string2> <output_variable>)
string(COMPARE GREATER_EQUAL <string1> <string2> <output_variable>)

Compare the strings and store true or false in the <output_variable>.

New in version 3.7: Added the LESS_EQUAL and GREATER_EQUAL options.

Hashing¶

string(<HASH> <output_variable> <input>)

Compute a cryptographic hash of the <input> string. The supported <HASH> algorithm names are:

MD5: Message-Digest Algorithm 5, RFC 1321.
SHA1: US Secure Hash Algorithm 1, RFC 3174.
SHA224: US Secure Hash Algorithms, RFC 4634.
SHA256: US Secure Hash Algorithms, RFC 4634.
SHA384: US Secure Hash Algorithms, RFC 4634.
SHA512: US Secure Hash Algorithms, RFC 4634.
SHA3_224: Keccak SHA-3.
SHA3_256: Keccak SHA-3.
SHA3_384: Keccak SHA-3.
SHA3_512: Keccak SHA-3.

New in version 3.8: Added the SHA3_* hash algorithms.

Generation¶

string(ASCII <number> [<number> ...] <output_variable>)

Convert all numbers into corresponding ASCII characters.

string(HEX <string> <output_variable>)

New in version 3.18.

Convert each byte in the input <string> to its hexadecimal representation and store the concatenated hex digits in the <output_variable>. Letters in the output (a through f) are in lowercase.

string(CONFIGURE <string> <output_variable>
       [@ONLY] [ESCAPE_QUOTES])

Transform a <string> like configure_file() transforms a file.

string(MAKE_C_IDENTIFIER <string> <output_variable>)

Convert each non-alphanumeric character in the input <string> to an underscore and store the result in the <output_variable>. If the first character of the <string> is a digit, an underscore will also be prepended to the result.

string(RANDOM [LENGTH <length>] [ALPHABET <alphabet>]
       [RANDOM_SEED <seed>] <output_variable>)

Return a random string of given <length> consisting of characters from the given <alphabet>. Default length is 5 characters and default alphabet is all numbers and upper and lower case letters. If an integer RANDOM_SEED is given, its value will be used to seed the random number generator.

string(TIMESTAMP <output_variable> [<format_string>] [UTC])

Write a string representation of the current date and/or time to the <output_variable>.

If the command is unable to obtain a timestamp, the <output_variable> will be set to the empty string "".

The optional UTC flag requests the current date/time representation to be in Coordinated Universal Time (UTC) rather than local time.

The optional <format_string> may contain the following format specifiers:

%%: New in version 3.8.

A literal percent sign (%).
%d: The day of the current month (01-31).
%H: The hour on a 24-hour clock (00-23).
%I: The hour on a 12-hour clock (01-12).
%j: The day of the current year (001-366).
%m: The month of the current year (01-12).
%b: New in version 3.7.

Abbreviated month name (e.g. Oct).
%B: New in version 3.10.

Full month name (e.g. October).
%M: The minute of the current hour (00-59).
%s: New in version 3.6.

Seconds since midnight (UTC) 1-Jan-1970 (UNIX time).
%S: The second of the current minute. 60 represents a leap second. (00-60)
%f: New in version 3.23.

The microsecond of the current second (000000-999999).
%U: The week number of the current year (00-53).
%V: New in version 3.22.

The ISO 8601 week number of the current year (01-53).
%w: The day of the current week. 0 is Sunday. (0-6)
%a: New in version 3.7.

Abbreviated weekday name (e.g. Fri).
%A: New in version 3.10.

Full weekday name (e.g. Friday).
%y: The last two digits of the current year (00-99).
%Y: The current year.
%z: New in version 3.26.

The offset of the time zone from UTC, in hours and minutes, with format +hhmm or -hhmm.
%Z: New in version 3.26.

The time zone name.

Unknown format specifiers will be ignored and copied to the output as-is.

If no explicit <format_string> is given, it will default to:

%Y-%m-%dT%H:%M:%S    for local time.
%Y-%m-%dT%H:%M:%SZ   for UTC.

New in version 3.8: If the SOURCE_DATE_EPOCH environment variable is set, its value will be used instead of the current time. See https://reproducible-builds.org/specs/source-date-epoch/ for details.

string(UUID <output_variable> NAMESPACE <namespace> NAME <name>
       TYPE <MD5|SHA1> [UPPER])

New in version 3.1.

Create a universally unique identifier (aka GUID) as per RFC4122 based on the hash of the combined values of <namespace> (which itself has to be a valid UUID) and <name>. The hash algorithm can be either MD5 (Version 3 UUID) or SHA1 (Version 5 UUID). A UUID has the format xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx where each x represents a lower case hexadecimal character. Where required, an uppercase representation can be requested with the optional UPPER flag.

JSON¶

New in version 3.19.

Functionality for querying a JSON string.

Note

In each of the following JSON-related subcommands, if the optional ERROR_VARIABLE argument is given, errors will be reported in <error-variable> and the <out-var> will be set to <member|index>-[<member|index>...]-NOTFOUND with the path elements up to the point where the error occurred, or just NOTFOUND if there is no relevant path. If an error occurs but the ERROR_VARIABLE option is not present, a fatal error message is generated. If no error occurs, the <error-variable> will be set to NOTFOUND.

string(JSON <out-var> [ERROR_VARIABLE <error-variable>]
       GET <json-string> <member|index> [<member|index> ...])

Get an element from <json-string> at the location given by the list of <member|index> arguments. Array and object elements will be returned as a JSON string. Boolean elements will be returned as ON or OFF. Null elements will be returned as an empty string. Number and string types will be returned as strings.

string(JSON <out-var> [ERROR_VARIABLE <error-variable>]
       TYPE <json-string> <member|index> [<member|index> ...])

Get the type of an element in <json-string> at the location given by the list of <member|index> arguments. The <out-var> will be set to one of NULL, NUMBER, STRING, BOOLEAN, ARRAY, or OBJECT.

string(JSON <out-var> [ERROR_VARIABLE <error-var>]
       MEMBER <json-string>
       [<member|index> ...] <index>)

Get the name of the <index>-th member in <json-string> at the location given by the list of <member|index> arguments. Requires an element of object type.

string(JSON <out-var> [ERROR_VARIABLE <error-variable>]
       LENGTH <json-string> [<member|index> ...])

Get the length of an element in <json-string> at the location given by the list of <member|index> arguments. Requires an element of array or object type.

string(JSON <out-var> [ERROR_VARIABLE <error-variable>]
       REMOVE <json-string> <member|index> [<member|index> ...])

Remove an element from <json-string> at the location given by the list of <member|index> arguments. The JSON string without the removed element will be stored in <out-var>.

string(JSON <out-var> [ERROR_VARIABLE <error-variable>]
       SET <json-string> <member|index> [<member|index> ...] <value>)

Set an element in <json-string> at the location given by the list of <member|index> arguments to <value>. The contents of <value> should be valid JSON.

string(JSON <out-var> [ERROR_VARIABLE <error-var>]
       EQUAL <json-string1> <json-string2>)

Compare the two JSON objects given by <json-string1> and <json-string2> for equality. The contents of <json-string1> and <json-string2> should be valid JSON. The <out-var> will be set to a true value if the JSON objects are considered equal, or a false value otherwise.

string¶

Synopsis¶

Search and Replace¶

Search and Replace With Plain Strings¶

Search and Replace With Regular Expressions¶

Regex Specification¶

Manipulation¶

Comparison¶

Hashing¶

Generation¶

JSON¶

Table of Contents

Previous topic

Next topic

This Page