string¶

String operations.

Synopsis¶

Search and Replace
  string(FIND <string> <substring> <out-var> [...])
  string(REPLACE <match-string> <replace-string> <out-var> <input>...)

Regular Expressions
  string(REGEX MATCH <match-regex> <out-var> <input>...)
  string(REGEX MATCHALL <match-regex> <out-var> <input>...)
  string(REGEX REPLACE <match-regex> <replace-expr> <out-var> <input>...)

Manipulation
  string(APPEND <string-var> [<input>...])
  string(PREPEND <string-var> [<input>...])
  string(CONCAT <out-var> [<input>...])
  string(JOIN <glue> <out-var> [<input>...])
  string(TOLOWER <string1> <out-var>)
  string(TOUPPER <string1> <out-var>)
  string(LENGTH <string> <out-var>)
  string(SUBSTRING <string> <begin> <length> <out-var>)
  string(STRIP <string> <out-var>)
  string(GENEX_STRIP <string> <out-var>)
  string(REPEAT <string> <count> <out-var>)

Comparison
  string(COMPARE <op> <string1> <string2> <out-var>)

Hashing
  string(<HASH> <out-var> <input>)

Generation
  string(ASCII <number>... <out-var>)
  string(CONFIGURE <string1> <out-var> [...])
  string(MAKE_C_IDENTIFIER <string> <out-var>)
  string(RANDOM [<option>...] <out-var>)
  string(TIMESTAMP <out-var> [<format string>] [UTC])
  string(UUID <out-var> ...)

Search and Replace¶

string(FIND <string> <substring> <output variable> [REVERSE])

Return the position where the given substring was found in the supplied string. If the REVERSE flag was used, the command will search for the position of the last occurrence of the specified substring. If the substring is not found, a position of -1 is returned.

string(REPLACE <match_string>
       <replace_string> <output variable>
       <input> [<input>...])

Replace all occurrences of match_string in the input with replace_string and store the result in the output.

Regular Expressions¶

string(REGEX MATCH <regular_expression>
       <output variable> <input> [<input>...])

Match the regular expression once and store the match in the output variable. All <input> arguments are concatenated before matching.

string(REGEX MATCHALL <regular_expression>
       <output variable> <input> [<input>...])

Match the regular expression as many times as possible and store the matches in the output variable as a list. All <input> arguments are concatenated before matching.

string(REGEX REPLACE <regular_expression>
       <replace_expression> <output variable>
       <input> [<input>...])

Match the regular expression as many times as possible and substitute the replacement expression for the match in the output. All <input> arguments are concatenated before matching.

The replace expression may refer to paren-delimited subexpressions of the match using \1, \2, …, \9. Note that two backslashes (\\1) are required in CMake code to get a backslash through argument parsing.

Regex Specification¶

The following characters have special meaning in regular expressions:

^: Matches at beginning of input
$: Matches at end of input
.: Matches any single character
\<char>: Matches the single character specified by <char>. Use this to match special regex characters, e.g. \. for a literal . or \\ for a literal backslash \. Escaping a non-special character is unnecessary but allowed, e.g. \a matches a.
[ ]: Matches any character(s) inside the brackets
[^ ]: Matches any character(s) not inside the brackets
-: Inside brackets, specifies an inclusive range between characters on either side e.g. [a-f] is [abcdef] To match a literal - using brackets, make it the first or the last character e.g. [+*/-] matches basic mathematical operators.
*: Matches preceding pattern zero or more times
+: Matches preceding pattern one or more times
?: Matches preceding pattern zero or once only
|: Matches a pattern on either side of the |
(): Saves a matched subexpression, which can be referenced in the REGEX REPLACE operation. Additionally it is saved by all regular expression-related commands, including e.g. if(MATCHES), in the variables CMAKE_MATCH_<n> for <n> 0..9.

*, + and ? have higher precedence than concatenation. | has lower precedence than concatenation. This means that the regular expression ^ab+d$ matches abbd but not ababd, and the regular expression ^(ab|cd)$ matches ab but not abd.

CMake language Escape Sequences such as \t, \r, \n, and \\ may be used to construct literal tabs, carriage returns, newlines, and backslashes (respectively) to pass in a regex. For example:

The quoted argument "[ \t\r\n]" specifies a regex that matches any single whitespace character.
The quoted argument "[/\\]" specifies a regex that matches a single forward slash / or backslash \.
The quoted argument "[A-Za-z0-9_]" specifies a regex that matches any single “word” character in the C locale.
The quoted argument "\$\\a\\+b\$" specifies a regex that matches the exact string (a+b). Each \\ is parsed in a quoted argument as just \, so the regex itself is actually $\a\+\b$. This can alternatively be specified in a Bracket Argument without having to escape the backslashes, e.g. [[$\a\+\b$]].

Manipulation¶

string(APPEND <string variable> [<input>...])

Append all the input arguments to the string.

string(PREPEND <string variable> [<input>...])

Prepend all the input arguments to the string.

string(CONCAT <output variable> [<input>...])

Concatenate all the input arguments together and store the result in the named output variable.

string(JOIN <glue> <output variable> [<input>...])

Join all the input arguments together using the glue string and store the result in the named output variable.

To join list’s elements, use preferably the JOIN operator from list() command. This allows for the elements to have special characters like ; in them.

string(TOLOWER <string1> <output variable>)

Convert string to lower characters.

string(TOUPPER <string1> <output variable>)

Convert string to upper characters.

string(LENGTH <string> <output variable>)

Store in an output variable a given string’s length.

string(SUBSTRING <string> <begin> <length> <output variable>)

Store in an output variable a substring of a given string. If length is -1 the remainder of the string starting at begin will be returned. If string is shorter than length then end of string is used instead.

Note

CMake 3.1 and below reported an error if length pointed past the end of string.

string(STRIP <string> <output variable>)

Store in an output variable a substring of a given string with leading and trailing spaces removed.

string(GENEX_STRIP <input string> <output variable>)

Strip any generator expressions from the input string and store the result in the output variable.

string(REPEAT <input string> <count> <output variable>)

Produce the output string as repetion of input string count times.

Comparison¶

string(COMPARE LESS <string1> <string2> <output variable>)
string(COMPARE GREATER <string1> <string2> <output variable>)
string(COMPARE EQUAL <string1> <string2> <output variable>)
string(COMPARE NOTEQUAL <string1> <string2> <output variable>)
string(COMPARE LESS_EQUAL <string1> <string2> <output variable>)
string(COMPARE GREATER_EQUAL <string1> <string2> <output variable>)

Compare the strings and store true or false in the output variable.

Hashing¶

string(<HASH> <output variable> <input>)

Compute a cryptographic hash of the input string. The supported <HASH> algorithm names are:

MD5: Message-Digest Algorithm 5, RFC 1321.
SHA1: US Secure Hash Algorithm 1, RFC 3174.
SHA224: US Secure Hash Algorithms, RFC 4634.
SHA256: US Secure Hash Algorithms, RFC 4634.
SHA384: US Secure Hash Algorithms, RFC 4634.
SHA512: US Secure Hash Algorithms, RFC 4634.
SHA3_224: Keccak SHA-3.
SHA3_256: Keccak SHA-3.
SHA3_384: Keccak SHA-3.
SHA3_512: Keccak SHA-3.

Generation¶

string(ASCII <number> [<number> ...] <output variable>)

Convert all numbers into corresponding ASCII characters.

string(CONFIGURE <string1> <output variable>
       [@ONLY] [ESCAPE_QUOTES])

Transform a string like configure_file() transforms a file.

string(MAKE_C_IDENTIFIER <input string> <output variable>)

Convert each non-alphanumeric character in the <input string> to an underscore and store the result in the <output variable>. If the first character of the string is a digit, an underscore will also be prepended to the result.

string(RANDOM [LENGTH <length>] [ALPHABET <alphabet>]
       [RANDOM_SEED <seed>] <output variable>)

Return a random string of given length consisting of characters from the given alphabet. Default length is 5 characters and default alphabet is all numbers and upper and lower case letters. If an integer RANDOM_SEED is given, its value will be used to seed the random number generator.

string(TIMESTAMP <output variable> [<format string>] [UTC])

Write a string representation of the current date and/or time to the output variable.

Should the command be unable to obtain a timestamp the output variable will be set to the empty string “”.

The optional UTC flag requests the current date/time representation to be in Coordinated Universal Time (UTC) rather than local time.

The optional <format string> may contain the following format specifiers:

%%        A literal percent sign (%).
%d        The day of the current month (01-31).
%H        The hour on a 24-hour clock (00-23).
%I        The hour on a 12-hour clock (01-12).
%j        The day of the current year (001-366).
%m        The month of the current year (01-12).
%b        Abbreviated month name (e.g. Oct).
%B        Full month name (e.g. October).
%M        The minute of the current hour (00-59).
%s        Seconds since midnight (UTC) 1-Jan-1970 (UNIX time).
%S        The second of the current minute.
          60 represents a leap second. (00-60)
%U        The week number of the current year (00-53).
%w        The day of the current week. 0 is Sunday. (0-6)
%a        Abbreviated weekday name (e.g. Fri).
%A        Full weekday name (e.g. Friday).
%y        The last two digits of the current year (00-99)
%Y        The current year.

Unknown format specifiers will be ignored and copied to the output as-is.

If no explicit <format string> is given it will default to:

%Y-%m-%dT%H:%M:%S    for local time.
%Y-%m-%dT%H:%M:%SZ   for UTC.

Note

If the SOURCE_DATE_EPOCH environment variable is set, its value will be used instead of the current time. See https://reproducible-builds.org/specs/source-date-epoch/ for details.

string(UUID <output variable> NAMESPACE <namespace> NAME <name>
       TYPE <MD5|SHA1> [UPPER])

Create a universally unique identifier (aka GUID) as per RFC4122 based on the hash of the combined values of <namespace> (which itself has to be a valid UUID) and <name>. The hash algorithm can be either MD5 (Version 3 UUID) or SHA1 (Version 5 UUID). A UUID has the format xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx where each x represents a lower case hexadecimal character. Where required an uppercase representation can be requested with the optional UPPER flag.

string¶

Synopsis¶

Search and Replace¶

Regular Expressions¶

Regex Specification¶

Manipulation¶

Comparison¶

Hashing¶

Generation¶

Table of Contents

Previous topic

Next topic

This Page